geboshi_V1/LeatherProject/GeBoShi/bin/Debug/ImageBox.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>ImageBox</name>
    </assembly>
    <members>
        <member name="F:ImageToolKits.HPictureBox.components">
            <summary> 
            必需的设计器变量。
            </summary>
        </member>
        <member name="M:ImageToolKits.HPictureBox.Dispose(System.Boolean)">
            <summary> 
            清理所有正在使用的资源。
            </summary>
            <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
        </member>
        <member name="M:ImageToolKits.HPictureBox.InitializeComponent">
            <summary> 
            设计器支持所需的方法 - 不要
            使用代码编辑器修改此方法的内容。
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox">
            <summary>
            自制控件
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.img2ClientInit">
            <summary>
            图像坐标与picturebox的工作区域之间在自适应或等比例缩放时计算出的初始变换矩阵
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.clientPoint">
            <summary>
            光标在PictureBox工作区域的坐标
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.sSize">
            <summary>
            表示画ROI时使用的尺寸（画点时十字大小的一半）或距离（点到直线、点到中心）的一半或小矩形的尺寸（标注角点）
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.fillModeTransparent">
            <summary>
            填充模式下的透明度[0-255]
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.brushWidth">
            <summary>
            画刷宽度
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.dLayers">
            <summary>
            绘制的图层集合
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.uvHxy">
            <summary>
            图像与实际物理坐标系之间的变换关系
            </summary>
        </member>
        <member name="E:ImageToolKits.ImageBox.DrawOverEventHandler">
            <summary>
            图像窗口交互绘制完成的事件
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.DrawStyle">
            <summary>
            获取或设置画图风格
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.ColorName">
            <summary>
            获取或设置区域或轮廓显示的颜色名称
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.IsColored">
            <summary>
            获取或设置多颜色显示区域或轮廓
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.LineWidth">
            <summary>
            获取或设置轮廓线的显示宽度
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.BackColor">
            <summary>
            获取或设置图像控件背景颜色
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.IsShowCenter">
            <summary>
            是否显示图像中心
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Image">
            <summary>
            当前窗口中的图像
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.DrawParam">
            <summary>
            获取最近一次所画图形
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.CursorModeEnum">
            <summary>
            光标模式
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.CursorModeEnum.Arrow">
            <summary>
            选择模式
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.CursorModeEnum.Hand">
            <summary>
            移动模式，可以拖拽图像
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.CursorModeEnum.Low">
            <summary>
            低配选点模式
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.CursorModeEnum.Point">
            <summary>
            高配选点模式
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.ImageModeEnum">
            <summary>
            图像显示方式枚举
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.ImageModeEnum.Stretch">
            <summary>
            图像被拉伸或收缩以适应图像窗口大小
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.ImageModeEnum.Zoom">
            <summary>
            图像大小按其原有的大小比例被增加或减小
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.ImageModeEnum.Part">
            <summary>
            图像按照原有显示区域显示，局部显示
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.DrawTypeEnum">
            <summary>
            画图形状枚举
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Point">
            <summary>
            点
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Line">
            <summary>
            直线
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Rectangle1">
            <summary>
            矩形1，与坐标轴平行的矩形
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Circle">
            <summary>
            圆
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Xld">
            <summary>
            任意形状的多边形
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Region">
            <summary>
            任意形状的区域
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.Brush">
            <summary>
            画刷区域
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawTypeEnum.None">
            <summary>
            空状态
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.DrawStyleEnum">
            <summary>
            画图风格
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawStyleEnum.Margin">
            <summary>
            轮廓显示
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawStyleEnum.Fill">
            <summary>
            填充显示
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.DrawStatusEnum">
            <summary>
            绘制图形的状态枚举
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawStatusEnum.Start">
            <summary>
            开始绘制
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawStatusEnum.Drawing">
            <summary>
            正在绘制
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.DrawStatusEnum.Over">
            <summary>
            绘制完成
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.BaseDrawParam">
            <summary>
            图像坐标系下图形结构体参数基类
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.BaseDrawParam.DrawType">
            <summary>
            图形绘制类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.BaseDrawParam.SmallestRectangle1">
            <summary>
            读取图形的平行于坐标轴的最小外接矩形
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.BaseDrawParam.IsValid">
            <summary>
            绘制的图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.ColorDrawParam">
            <summary>
            区域+颜色类型
            </summary>
        </member>
        <member name="T:ImageToolKits.ImageBox.Point">
            <summary>
            点类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Point.Row">
            <summary>
            点行坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Point.Column">
            <summary>
            点列坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Point.DrawType">
            <summary>
            图形类型，其值为【Point】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Point.SmallestRectangle1">
            <summary>
            点的平行于坐标轴的最小外界矩形（无效结果）
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Point.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.Line">
            <summary>
            线类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Line.Start">
            <summary>
            线段的起点坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Line.End">
            <summary>
            线段的终点坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Line.DrawType">
            <summary>
            图形类型，其值为【Line】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Line.SmallestRectangle1">
            <summary>
            线的平行于坐标轴的最小外界矩形（无效结果）
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Line.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.Rectangle1">
            <summary>
            平行于坐标轴的矩形类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Rectangle1.LeftUp">
            <summary>
            矩形左上角顶点坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Rectangle1.RightDown">
            <summary>
            矩形右下角顶点坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Rectangle1.Width">
            <summary>
            矩形宽
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Rectangle1.Height">
            <summary>
            矩形高
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Rectangle1.DrawType">
            <summary>
            图形类型，其值为【Rectangle1】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Rectangle1.SmallestRectangle1">
            <summary>
            矩形的平行于坐标轴的最小外界矩形
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Rectangle1.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.Circle">
            <summary>
            圆类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Circle.Center">
            <summary>
            圆心点坐标
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Circle.Radius">
            <summary>
            圆半径
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Circle.DrawType">
            <summary>
            图形类型，其值为【Circle】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Circle.SmallestRectangle1">
            <summary>
            圆的平行于坐标轴的最小外界矩形
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Circle.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.Xld">
            <summary>
            多边形类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Xld.Corners">
            <summary>
            多边形角点坐标集合
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Xld.DrawType">
            <summary>
            图形类型，其值为【Xld】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Xld.SmallestRectangle1">
            <summary>
            多边形的平行于坐标轴的最小外界矩形
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Xld.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.Region">
            <summary>
            区域类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Region.Points">
            <summary>
            区域轮廓点的集合
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Region.DrawType">
            <summary>
            图形类型，其值为【Region】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Region.SmallestRectangle1">
            <summary>
            任意区域的平行于坐标轴的最小外界矩形
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Region.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="T:ImageToolKits.ImageBox.Brush">
            <summary>
            画刷区域类型
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Brush.Regions">
            <summary>
            区域轮廓点的集合
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Brush.DrawType">
            <summary>
            图形类型，其值为【Region】
            </summary>
        </member>
        <member name="P:ImageToolKits.ImageBox.Brush.SmallestRectangle1">
            <summary>
            画刷区域的平行于坐标轴的最小外界矩形
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Brush.IsValid">
            <summary>
            图形是否有效
            </summary>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.InitImage2ClientMatrix">
            <summary>
            图像到初始化图像控件的变换矩阵
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetImageRectangle(System.Windows.Forms.PictureBox)">
            <summary>
            获取图像在控件上Client区域
            </summary>
            <param name="picBox"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.ShowCenter">
            <summary>
            显示中心，有图像时显示的是图像的中心，否则显示图像窗口的中心
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.AddROI2GraphicsPath(System.Drawing.Drawing2D.GraphicsPath,System.Drawing.Drawing2D.GraphicsPath,System.Collections.Generic.Dictionary{System.Int32,ImageToolKits.ImageBox.DrawPoint},ImageToolKits.ImageBox.DrawTypeEnum,System.Boolean)">
            <summary>
            根据drawPoints绘制ROI,添加到GraphicsPath中
            </summary>
            <param name="gpROI">ROI图形路径</param>
            <param name="gpInteractive">交互图形路径</param>
            <param name="drawPoints">轮廓点集合</param>
            <param name="drawType">图形类型</param>
            <param name="isDrawing">是否是交互绘制</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.AddROI2GraphicsPath(System.Drawing.Drawing2D.GraphicsPath,System.Drawing.Drawing2D.GraphicsPath,ImageToolKits.ImageBox.BaseDrawParam)">
            <summary>
            根据drawParam绘制ROI,添加到GraphicsPath中
            </summary>
            <param name="gpROI">ROI图形路径</param>
            <param name="gpInteractive">交互图形路径</param>
            <param name="baseDrawPrm">ROI</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.DrawROIByGraphicsPath(System.Drawing.Graphics,System.Drawing.Drawing2D.GraphicsPath,System.Drawing.Drawing2D.GraphicsPath)">
            <summary>
            根据绘图路径绘制ROI
            </summary>
            <param name="g"></param>
            <param name="gpROI">ROI图形路径</param>
            <param name="gpInteractive">交互图形路径</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.DrawROIByGraphicsPath(System.Drawing.Graphics,System.Drawing.Drawing2D.GraphicsPath,System.Drawing.Drawing2D.GraphicsPath,System.Drawing.Color)">
            <summary>
            根据绘图路径绘制ROI
            </summary>
            <param name="g"></param>
            <param name="gpROI">ROI图形路径</param>
            <param name="gpInteractive">交互图形路径</param>
            <param name="color">颜色</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetInsideIndex(System.Drawing.PointF)">
            <summary>
            计算某个点是否在某些点内部
            </summary>
            <param name="point"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.InsertXldCornerPoints(ImageToolKits.ImageBox.DrawPoint,System.Int32@,System.Collections.Generic.Dictionary{System.Int32,ImageToolKits.ImageBox.DrawPoint}@)">
            <summary>
            在画xld时，判断是否将新增点插入某两个点中间
            前提是新增点不在原有角点附近
            </summary>
            <param name="point"></param>
            <param name="insideIndex">更新后该点在点集合中的索引位置</param>
            <param name="dDrawPoint"></param>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetImageCoord(System.Drawing.PointF)">
            <summary>
            获取鼠标指针在图像中的坐标
            </summary>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetClientCoord(ImageToolKits.ImageBox.Point)">
            <summary>
            获取图形点位在控件工作区域内坐标
            </summary>
            <param name="imagePoint"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.TransToDrawParam(System.Collections.Generic.Dictionary{System.Int32,ImageToolKits.ImageBox.DrawPoint},ImageToolKits.ImageBox.DrawTypeEnum)">
            <summary>
            将控件坐标转换成图像坐标
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.TransFromDrawParam(ImageToolKits.ImageBox.BaseDrawParam,System.Boolean)">
            <summary>
            将图形坐标转换成控件坐标
            </summary>
            <param name="drawPrm"></param>
            <param name="cvt2client"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.Get2DGrayval(OpenCvSharp.Mat,System.Int32,System.Int32)">
            <summary>
            获取图像灰度信息
            </summary>
            <param name="image"></param>
            <param name="row"></param>
            <param name="column"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetCirclePointsF(ImageToolKits.ImageBox.Circle,System.Single,System.Single,System.Single)">
            <summary>
            获取圆上离散点坐标
            </summary>
            <param name="circle">圆</param>
            <param name="angleStart">起始角度，单位：°</param>
            <param name="angleExtent">角度范围，单位：°</param>
            <param name="angleStep">离散点获取的步长，单位：°</param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetCirclePoints(ImageToolKits.ImageBox.Circle,System.Single,System.Single,System.Single)">
            <summary>
            获取圆上离散点坐标
            </summary>
            <param name="circle">圆</param>
            <param name="angleStart">起始角度，单位：°</param>
            <param name="angleExtent">角度范围，单位：°</param>
            <param name="angleStep">离散点获取的步长，单位：°</param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetCirclePointsFExt(ImageToolKits.ImageBox.Circle,System.Single,System.Single,System.Single)">
            <summary>
            获取圆上离散点坐标
            </summary>
            <param name="circle">圆</param>
            <param name="angleStart">起始角度，单位：°</param>
            <param name="angleExtent">角度范围，单位：°</param>
            <param name="angleStep">离散点获取的步长，单位：°</param>
            <returns>Point类型</returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetLineAngle(System.Drawing.PointF,System.Drawing.PointF,System.Boolean)">
            <summary>
            计算线段角度（起点到终点方向），单位：°
            </summary>
            <param name="start">线段起点</param>
            <param name="end">线段终点</param>
            <param name="isNormalized">默认角度范围是[-180,180]，归一化之后为[-90,90]</param>
            <returns>返回线段角度，单位：°</returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetBrushEdgePointsBySkelton(System.Collections.Generic.Dictionary{System.Int32,ImageToolKits.ImageBox.DrawPoint})">
            <summary>
            根据骨架线计算包围轮廓线
            </summary>
            <param name="drawPoints"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetMeanPoint(ImageToolKits.ImageBox.Point,ImageToolKits.ImageBox.Point)">
            <summary>
            计算两点中点（迭代计算任意两点间被N等分点）
            </summary>
            <param name="start"></param>
            <param name="end"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetRegionPoints1(ImageToolKits.ImageBox.BaseDrawParam)">
            <summary>
            获取区域包含的点坐标
            </summary>
            <param name="baseDrawPrm"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetRegionPolygon(ImageToolKits.ImageBox.BaseDrawParam)">
            <summary>
            获取轮廓占据的像素点（包含像素去重）
            </summary>
            <param name="baseDrawParam"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetRegionRuns(System.Collections.Generic.List{ImageToolKits.ImageBox.Point})">
            <summary>
            获取区域Runs，默认输入的点已经去重处理
            </summary>
            <param name="points"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.Dispose">
            <summary>
            释放控件占用的所有资源
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.SetStripVisible(System.Boolean)">
            <summary>
            设置右键菜单栏中选项是否可见
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.SetIconsVisible(System.Boolean)">
            <summary>
            设置左侧交互按钮是否可见
            </summary>
            <param name="isVisible"></param>
        </member>
        <member name="M:ImageToolKits.ImageBox.SetStatusVisible(System.Boolean)">
            <summary>
            设置底部图像信息栏是否可见
            </summary>
            <param name="isVisible"></param>
        </member>
        <member name="M:ImageToolKits.ImageBox.SetInteractive(System.Boolean)">
            <summary>
            设置图像窗口是否激活，
            显示图像和区域之前不需要激活图像控件
            显示图像和区域之后需要激活图像控件
            </summary>
            <param name="isActive"></param>
        </member>
        <member name="M:ImageToolKits.ImageBox.ClearWindow">
            <summary>
            清除图像窗口，图像数据并未清除
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.ReadImage(System.String,OpenCvSharp.Mat@)">
            <summary>
            加载图像
            </summary>
            <param name="fileName">图像路径，需要是英文路径</param>
            <param name="image">图像Mat</param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.WriteImage(System.String,OpenCvSharp.Mat)">
            <summary>
            保存图像
            </summary>
            <param name="fileName">图像路径，需要时英文路径</param>
            <param name="image">图像Mat</param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.WriteWindowDumpImage(System.String,System.Drawing.Size)">
            <summary>
            截图当前窗口
            </summary>
            <param name="fileName"></param>
            <param name="size"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.WriteWindowDumpImage(System.String,OpenCvSharp.Mat,System.Collections.Generic.List{ImageToolKits.ImageBox.BaseDrawParam},System.Drawing.Size)">
            <summary>
            将区域信息绘制在图像上保存
            </summary>
            <param name="fileName"></param>
            <param name="image"></param>
            <param name="region"></param>
            <param name="size"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.RefreshWindow(OpenCvSharp.Mat,System.Collections.Generic.List{ImageToolKits.ImageBox.BaseDrawParam},ImageToolKits.ImageBox.ImageModeEnum)">
            <summary>
            显示图像与区域
            </summary>
            <param name="image">图像</param>
            <param name="region">一个或多个区域</param>
            <param name="imageMode">图像显示方式，见枚举ImageModeEnum</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.RefreshWindow(OpenCvSharp.Mat,System.Collections.Generic.List{ImageToolKits.ImageBox.ColorDrawParam},ImageToolKits.ImageBox.ImageModeEnum)">
            <summary>
            显示图像与区域
            </summary>
            <param name="image">图像</param>
            <param name="colorRegion">一个或多个不同颜色区域</param>
            <param name="imageMode">图像显示方式，见枚举ImageModeEnum</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.RefreshWindow(OpenCvSharp.Mat,ImageToolKits.ImageBox.BaseDrawParam,ImageToolKits.ImageBox.ImageModeEnum)">
            <summary>
            显示图像与区域
            </summary>
            <param name="image">图像</param>
            <param name="region">一个区域</param>
            <param name="imageMode">图像显示方式，见枚举ImageModeEnum</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.RefreshWindow(OpenCvSharp.Mat,ImageToolKits.ImageBox.ImageModeEnum)">
            <summary>
            显示图像与区域
            </summary>
            <param name="image">图像</param>
            <param name="imageMode">图像显示方式，见枚举ImageModeEnum</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.DisplayROIs(System.Collections.Generic.List{ImageToolKits.ImageBox.BaseDrawParam})">
            <summary>
            显示多个区域
            </summary>
            <param name="lDrawParam">多个区域</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.DisplayROIs(System.Collections.Generic.List{ImageToolKits.ImageBox.ColorDrawParam})">
            <summary>
            显示多个区域分色
            </summary>
            <param name="lDrawParam">多个区域</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.DisplayROI(ImageToolKits.ImageBox.BaseDrawParam)">
            <summary>
            显示一个区域
            </summary>
            <param name="drawParam">一个区域</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetPart(ImageToolKits.ImageBox.Rectangle1@)">
            <summary>
            获取当前图像显示的局部位置
            </summary>
            <param name="rectangle">图像局部范围</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.SetPart(ImageToolKits.ImageBox.Rectangle1)">
            <summary>
            设置图像显示的局部位置
            </summary>
            <param name="rectangle">图像局部范围</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.SmallestRectangle1(System.Collections.Generic.List{ImageToolKits.ImageBox.BaseDrawParam})">
            <summary>
            计算ROI集合的平行于坐标轴的最小外接矩形
            </summary>
            <param name="lDrawPrm"></param>
            <returns>平行于坐标轴的最小外接矩形</returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.GetRegionPoints(ImageToolKits.ImageBox.BaseDrawParam)">
            <summary>
            获取区域包含的点坐标
            </summary>
            <param name="baseDrawPrm"></param>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.ImageBox.SetLowLevelMode(System.Int32)">
            <summary>
            特色功能低配置版，只能放大缩小，移动，取点
            </summary>
        </member>
        <member name="F:ImageToolKits.ImageBox.components">
            <summary>
            必需的设计器变量。
            </summary>
        </member>
        <member name="M:ImageToolKits.ImageBox.Dispose(System.Boolean)">
            <summary>
            清理所有正在使用的资源。
            </summary>
            <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
        </member>
        <member name="M:ImageToolKits.ImageBox.InitializeComponent">
            <summary>
            设计器支持所需的方法 - 不要
            使用代码编辑器修改此方法的内容。
            </summary>
        </member>
        <member name="T:ImageToolKits.Layer">
            <summary>
            图层
            </summary>
        </member>
        <member name="F:ImageToolKits.Layer.uvHxy">
            <summary>
            图像与实际物理坐标系之间的变换关系
            </summary>
        </member>
        <member name="P:ImageToolKits.Layer.CurPosize">
            <summary>
            获取图形当前位姿与尺寸信息
            </summary>
        </member>
        <member name="P:ImageToolKits.Layer.Name">
            <summary>
            图层ID
            </summary>
        </member>
        <member name="P:ImageToolKits.Layer.Image">
            <summary>
            图层需要显示的对象
            </summary>
        </member>
        <member name="P:ImageToolKits.Layer.IsActive">
            <summary>
            图层对象是否激活
            </summary>
        </member>
        <member name="P:ImageToolKits.Layer.DrawPoints">
            <summary>
            代表图形变换后需要绘制的区域的点，单位像素，长度为4
            </summary>
        </member>
        <member name="P:ImageToolKits.Layer.TrackPoints">
            <summary>
            突出显示当前图形的顶点坐标，单位像素，长度为4
            </summary>
        </member>
        <member name="M:ImageToolKits.Layer.#ctor(OpenCvSharp.Mat,System.String,ImageToolKits.PoseSize,System.Drawing.Drawing2D.Matrix)">
            <summary>
            
            </summary>
            <param name="image">cv mat</param>
            <param name="name">图层名称</param>
            <param name="srcPosize">图形原始位姿和尺寸信息</param>
            <param name="uvHxy">图像与实际物理坐标系之间的变换关系</param>       
        </member>
        <member name="M:ImageToolKits.Layer.#ctor(System.Drawing.Bitmap,System.String,ImageToolKits.PoseSize,System.Drawing.Drawing2D.Matrix)">
            <summary>
            
            </summary>
            <param name="image">bitmap image</param>
            <param name="name">图层名称</param>
            <param name="srcPosize">图形原始位姿和尺寸信息</param>
            <param name="uvHxy">图像与实际物理坐标系之间的变换关系</param>       
        </member>
        <member name="M:ImageToolKits.Layer.Trans2Transparent">
            <summary>
            将ezcad四通道图形转成透明图形
            </summary>
            <returns></returns>
        </member>
        <member name="M:ImageToolKits.Layer.GraphTransform(ImageToolKits.PoseSize,System.Boolean)">
            <summary>
            图形变换
            </summary>
            <param name="posize">图形位姿和尺寸信息</param>     
            <param name="isRotation">是否旋转图形，true只旋转图形，false缩放和平移图形</param>
        </member>
        <member name="T:ImageToolKits.PoseSize">
            <summary>
            图形的位姿和尺寸类
            </summary>
        </member>
        <member name="P:ImageToolKits.PoseSize.X">
            <summary>
            图形位置X，单位mm
            </summary>
        </member>
        <member name="P:ImageToolKits.PoseSize.Y">
            <summary>
            图形位置Y，单位mm
            </summary>
        </member>
        <member name="P:ImageToolKits.PoseSize.Angle">
            <summary>
            图形角度，单位角度
            </summary>
        </member>
        <member name="P:ImageToolKits.PoseSize.Size">
            <summary>
            图形尺寸，单位mm
            </summary>
        </member>
        <member name="T:ImageToolKits.Properties.Resources">
            <summary>
              一个强类型的资源类，用于查找本地化的字符串等。
            </summary>
        </member>
        <member name="P:ImageToolKits.Properties.Resources.ResourceManager">
            <summary>
              返回此类使用的缓存的 ResourceManager 实例。
            </summary>
        </member>
        <member name="P:ImageToolKits.Properties.Resources.Culture">
            <summary>
              重写当前线程的 CurrentUICulture 属性，对
              使用此强类型资源类的所有资源查找执行重写。
            </summary>
        </member>
    </members>
</doc>