banboshi_V2/halftoneproject-master/BanBoShi/SysCtrl/SysEnum.cs

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

namespace MaiMuAOI.SysCtrl
{
    public enum LightChannelEnum
    {
        [Description("通道1")]
        CH1 = 1,
        [Description("通道2")]
        CH2 = 2,
        [Description("通道3")]
        CH3 = 3,
        [Description("通道4")]
        CH4 = 4,
        [Description("通道5")]
        CH5 = 5,
        [Description("通道6")]
        CH6 = 6,
    }
    public enum AxisName
    {
        [Description("0-X1轴")]
        Axis0 = 0,
        [Description("1-X2轴")]
        Axis1 = 1,
        [Description("2-Y轴")]
        Axis2 = 2,
        [Description("3-Z轴")]
        Axis3 = 3,
    }
    public enum AxMoveMode
    {
        //MODE1_Abs = 0,
        //MODE2_Rel = 1,
        绝对位置 = 0,
        相对位置 = 1,
    }

    public enum MarkCam
    {
        尺寸检测Mark,
        缺陷检测Mark
    }
    public enum SmallAxCmdPos
    {
        倍率0_58X = 0,
        倍率1_0X = 4600,
        倍率1_5X = 6700,
        倍率2_0X = 8400,
        倍率2_5X = 10300,
        倍率3_0X = 11700,
        倍率3_5X = 12800,
        倍率4_0X = 13650,
        倍率4_5X = 14500,
        倍率5_0X = 15200,
        倍率5_5X = 15900,
        倍率6_0X = 16500,
        倍率6_5X = 17150,
        倍率7_0X = 17700,
        倍率7_5X = 18650,
    }
    public enum IODirectionEnum
    {
        [Description("仅输入")]
        输入 = 0,
        [Description("仅输出")]
        输出 = 1,
        [Description("输入与输出")]
        输入输出 = 2,
    }
    public enum AxisState : uint
    {
        STA_AX_DISABLE,
        STA_AX_READY,
        STA_AX_STOPPING,
        STA_AX_ERROR_STOP,
        STA_AX_HOMING,
        STA_AX_PTP_MOT,
        STA_AX_CONTI_MOT,
        STA_AX_SYNC_MOT,
        STA_AX_EXT_JOG,
        STA_AX_EXT_MPG,
        STA_AX_PAUSE,
        STA_AX_BUSY,
        STA_AX_WAIT_DI,
        STA_AX_WAIT_PTP,
        STA_AX_WAIT_VEL
    }
    public enum ScannerType
    {
        [Description("板卡相机")]
        GENTL = 0,
        [Description("网口相机")]
        CC = 1,
    }
    public enum AIEngineLibEnum
    {
        [Description("缺陷库")]
        缺陷库 = 0,
        [Description("测量库")]
        测量库 = 1,
        [Description("缺陷与测量库")]
        缺陷与测量库 = 2,
    }
    public enum DefectCodeEnum
    {
        [Description("堵孔")]
        dk,
        [Description("脏污")]
        zw,
        [Description("纤维丝")]
        xws,
        [Description("钢丝异常")]
        gsyc,
        [Description("缺口")]
        qk,
        [Description("针孔")]
        zk,
        [Description("泡泡")]
        pp,
        [Description("划伤")]
        hs,
        [Description("压线")]
        yx,
        [Description("斜边")]
        xb,
        [Description("栅线")]
        sx,
        [Description("断栅")]
        ds,
    }
    public enum DefectNameEnum
    {
        堵孔,
        脏污,
        纤维丝,
        钢丝异常,
        缺口,
        针孔,
        泡泡,
        划伤,
        压线,
        斜边,
        栅线,
        断栅
    }
    public enum ValType
    {
        字符串,
        数值,
    }

    public enum CMDName
    {
        IO默认输出 = 0,

        启动按钮 = 10,//输入+输出
        暂停按钮 = 11,//输入+输出
        复位按钮 = 12,//输入+输出

        绿灯输出 = 15,
        黄灯输出 = 16,
        红灯输出 = 17,
        日光灯输出 = 18,

        蜂鸣器输出 = 20,

        //张力读取结束输出 = 25,//张力读取
        张力读取 = 25,//张力读取
        喷墨输出 = 26,

        门磁告警输入 = 30,
        喷墨告警输入 = 31,
        厚度气缸与轴运动告警 = 34,

        下料完成输出 = 35,

        Y轴复位输出 = 40,
        Y轴复位完成输入 = 41,
    }
    public enum DOName
    {
        三色灯红灯 = 0,
        三色灯绿灯 = 1,
        三色灯黄灯 = 2,
        三色灯蜂鸣器 = 3,

        测厚气缸 = 4,
        加紧气缸 = 5,

        双手启动绿灯 = 7,
        启动按钮绿灯 = 8,
        复位按钮黄灯 = 9,
        停止按钮红灯 = 10,

        触发张力按钮灯 = 11,

        日光灯 = 12,

        X1回原 = 13,
        X2回原 = 14,

        Y轴回原点 = 15
    }

    public enum DIName
    {
        启动按钮 = 14,
        暂停按钮 = 3,
        复位按钮 = 2,

        触发张力 = 4,

        产品有无 = 5,

        右夹紧缩回 = 6,
        右夹紧伸出 = 7,
        前夹紧缩回 = 8,
        前夹紧伸出 = 9,
        侧推伸出 = 0,
        侧推缩回 = 1,

        双手启动 = 10,
        门磁 = 11,
        Y轴回原点完成 = 15
    }
    /// <summary>
    /// 数据处理方式
    /// </summary>
    public enum DataProcess
    {
        均值,
        最大值,
        最小值
    }

    /// <summary>
    /// 数据判断方式
    /// </summary>
    public enum DataJudgment
    {
        均值,
        单点,
    }

    public enum PointTestType
    {
        Y轴方向PT值检测,
        线宽正面,
        反面检测,
        X轴方向PT值检测,
        主栅连接线检测,
        主栅宽度检测,
        主栅间距,
        细栅间距检测,
        背极宽度,
        主栅长度检测,
        Mark点横向间距,
        Mark点竖向间距,
        鱼叉口长,
        鱼叉口宽,
        鱼叉口间距
    }

    #region 打印数据类型
    public enum PrinterType
    {
        Label,
        Excel
    }
    public enum PrintDataEnum
    {
        [Description("检测结果")]
        Qualified,
        [Description("外观比对")]
        CompareResult,

        [Description("张力均值")]
        TensionValue,
        [Description("膜厚均值")]
        HeightValue,
        [Description("线宽均值")]
        LineWidthValue,
        [Description("Y-PT均值")]
        PTValue,
        [Description("X-PT均值")]
        XPTValue,

        [Description("张力上下限")]
        TensionValueLimit,
        [Description("膜厚上下限")]
        HeightValueLimit,
        [Description("线宽上下限")]
        LineWidthValueLimit,
        [Description("Y-PT上下限")]
        PTValueLimit,
        [Description("X-PT上下限")]
        XPTValueLimit,

        [Description("缺陷总数")]
        DefectCount,
        [Description("堵孔数量")]
        DKCount,
        [Description("脏污数量")]
        ZWCount,
        [Description("钢丝异常数量")]
        GSYCCount,
        [Description("纤维丝数量")]
        XWSCount,
        [Description("缺口数量")]
        QKCount,
        [Description("针孔数量")]
        ZKCount,
        [Description("泡泡数量")]
        PPCount,
        [Description("划伤数量")]
        HSCount,
        [Description("压线数量")]
        YXCount,
        [Description("斜边数量")]
        XBCount,
        [Description("栅线数量")]
        SXCount,

        [Description("检测单号")]
        DetectOrder,
        [Description("料号")]
        OrderCode,
        [Description("料号名称")]
        OrderName,
        [Description("料号批次")]
        BatchId,
        [Description("网版编码")]
        SN,

        [Description("检测时间")]
        Time,
        [Description("操作员")]
        OperatorName,
    }
    static class EnumExtensions
    {
        public static string GetDescription(this Enum val)
        {
            var field = val.GetType().GetField(val.ToString());
            var customAttribute = Attribute.GetCustomAttribute(field, typeof(DescriptionAttribute));
            return customAttribute == null ? val.ToString() : ((DescriptionAttribute)customAttribute).Description;
        }
    }

    #endregion

    #region MES代码
    public enum MesCodeEnum
    {
        [Description("检测单号")]
        MM0001,
        [Description("料号")]
        MM0002,
        [Description("料号名称")]
        MM0003,
        [Description("网版编码")]
        MM0004,    
        [Description("操作员")]
        MM0005,
        [Description("检测时间")]
        MM0006,
        [Description("料号批次")]
        MM0007,

        
        [Description("外观比对")]
        MM0008,
        [Description("检测结果")]
        MM0009,

        [Description("张力均值")]
        MM0010,
        [Description("膜厚均值")]
        MM0011,
        [Description("线宽均值")]
        MM0012,
        [Description("Y-PT均值")]
        MM0013,
        [Description("X-PT均值")]
        MM0014,

        [Description("主栅连接线检测(主栅间隔)")]
        MM0015,
        [Description("主栅宽度检测")]
        MM0016,
        [Description("主栅间距")]
        MM0017,
        [Description("细栅间距检测")]
        MM0018,
        [Description("背极宽度")]
        MM0019,
        [Description("主栅长度检测")]
        MM0020,
        [Description("Mark点横向间距")]
        MM0021,
        [Description("Mark点竖向间距")]
        MM0022,
        [Description("鱼叉口长")]
        MM0023,
        [Description("鱼叉口宽")]
        MM0024,
        [Description("鱼叉口间距")]
        MM0025,

        [Description("缺陷总数")]
        MALL000,
        [Description("堵孔数量")]
        MDK000,
        [Description("脏污数量")]
        MZW000,
        [Description("钢丝异常数量")]
        MGSYC000,
        [Description("纤维丝数量")]
        MQWS000,
        [Description("缺口数量")]
        MQK000,
        [Description("针孔数量")]
        MZK000,
        [Description("泡泡数量")]
        MPP000,
        [Description("划伤数量")]
        MHS000,
        [Description("压线数量")]
        MYX000,
        [Description("斜边数量")]
        MXB000,
        [Description("栅线数量")]
        MSX000,

        [Description("检测单号")]
        DetectOrder,
        [Description("料号")]
        OrderCode,
        [Description("料号名称")]
        OrderName,
        [Description("料号批次")]
        BatchId,
        [Description("网版编码")]
        SN,

        
    }
    #endregion
}